1. Product Introduction of PFE 95 Meltblown nonwoven fabric
PFE 95 Melt blown cloth is the main raw material for the three types of masks, N90/N95/N99. Melt blown cloth is made of polypropylene as the main raw material. Because the fiber diameter of polypropylene is small, the produced melt blown cloth can play a very good filtering role.
2. مشخصات پارچه منسوج PFE 95 Meltblown
هسته |
Polypropylene |
Weight |
25gsm, 40gsm or as required |
Width |
175mm, 260mm or as required |
Weight/roll |
6-7 کیلوگرم در رول |
Application |
Disposable Masks, , N95 Masks, FFP2 Mask,FFP3 Mask |
ویژگی |
مقاومت در برابر نفس پایین ، راندمان بالای فیلتر |
3 ویژگی های پارچه نبافته PFE 95 Meltblown
1. The fiber has a small diameter, which is smaller than many viruses, and can act like a sieve to filter the viruses out.
2. With static electricity, small molecule polymer fibers such as propylene are easy to charge static electricity when combined together. Static electricity has a strong adsorption capacity to prevent viruses from entering, similar to electrostatic dust removal.
3. الیاف نازک است و اصل الیاف نازک شبیه به الیاف اول است. فیبر کوچک می تواند از ورود ویروس جلوگیری کند.
4. خدمات تحویل و حمل و نقل پارچه منسوج PFE 95 Meltblown
Qdboss PFE 95 Meltblown nonwoven fabric is packed in durable cartons, it is safe to be shipped by truck, sea and plane. Qdboss factory is located in the Jiaozhou, Qingdao, only one hour drive to the famous Qingdao Port and Qingdao Jiaodong International Airport. It can save the domestic shipping cost and provide fast and convenient delivery
5. فرآیند تولید پارچه منسوج PFE 95 Meltblown
پارچه مذاب N95 با جریان هوای گرم و سریع ساخته می شود تا جریان نازکی از مذاب پلیمری را که از روزنه قالب خارج می شود ، بدست آورد و در نتیجه الیاف فوق العاده ریز تشکیل داده و آنها را بر روی صفحه یا غلتک متراکم جمع می کند و در عین حال خود را به تبدیل به پارچه نبافته ذوب شده شوید.
The production process of melt-blown cloth is mainly as follows:
1. Melt preparation
2. فیلتر کنید
3. اندازه گیری
4. Melt is extruded from the spinneret
5. Melt trickle drafting and cooling
6. Netting
6 Loading Quantity of PFE 95 Meltblown nonwoven fabric
فقط برای بسته بندی کارتن ، حدود 3 تن در ظرف 20GP و 9 تن در ظرف 40HC قابل بارگیری است. برای اطمینان از کمترین میزان بارگیری ، پیشنهاد نمی کنیم از پالت استفاده شود.
7 Standards:
N95 BFE (Bacterial Filtration Efficiency) ≥90٪≥95% ≥99٪
EN149 FFP1 :>80% FFP2>94% FFP3>99٪
COMPOSITION, INFORMATION ON INGREDIENTS
Components |
درصد وزن |
شماره CAS |
Polypropylene |
97٪ |
9003-07-0 |
آب دسته اصلی برق |
3% |
3147-75-9 |